Oltre 60 novità nel nuovo FRITZ!OS 8 che offre una migliore panoramica e più comfort nella rete locale:
- Nuove opzioni per Smart Home con scenari e routine
- Monitor online per il monitoraggio del traffico dei singoli dispositivi
- Nuova visualizzazione dell'utilizzo della rete Wi-Fi nella rete locale
- Panoramica della rete Mesh per individuare più facilmente i dispositivi della rete locale
- Configurazione del FRITZ!Box tramite smartphone
- WireGuard adesso anche per connessioni IPv6
- Più chiamate DECT contemporaneamente
L'aggiornamento FRITZ!OS 8 si può cercare nell'interfaccia utente del FRITZ!Box (Sistema > Aggiornamento > Cercare nuovo FRITZ!OS) oppure si può usare la comoda funzione di aggiornamento automatico.
L'aggiornamento a FRITZ!OS 8 è disponibile al momento per i modelli AX di FRITZ!Box ma non è escluso che a breve sarà reso disponibile per tutti gli altri dispositivi attivi della serie.
Codice:
The update file "FRITZ.Box_7590_AX-xx.xx.image" on ftp.avm.de contains the latest FRITZ!OS (Firmware) for the FRITZ!Box 7590 AX.
**Attention:** This update file is only intended for use with FRITZ!Box 7590 AX!
Please follow the instructions at the end of this file to install the update.
```
Product: FRITZ!Box 7590 AX
Version: FRITZ!OS 8.00
Language: Dutch, English, French, German, Italian, Polish, Spanish
Release date: 16/09/2024
```
**New features:**
------------------------------------------------------------
- User interface: Diagram showing the connections in the overview (homepage)
- New Online Monitor informs about the load on the internet connection and the load by individual network devices
- Internet: Now IPv6 data can also be transmitted via a WireGuard® VPN tunnel
- Mesh: Redesigned diagram of all devices connected with the FRITZ!Box with additional functions
- DECT: The number of DECT telephone calls possible concurrently was increased from three to five
- Push service: Reworked design and more convenience
------------------------------------------------------------
With each FRITZ!OS update, AVM also updates its security functions. Therefore we recommend performing the update for all devices.
------------------------------------------------------------
Below you find a complete list and descriptions of the new functions in the latest FRITZ!OS, along with a list of further improvements in this version.
---
# New features and improvements in FRITZ!OS 8.00
## Internet:
- **NEW** IPv6 data now can also be transferred via a WireGuard® VPN tunnel (new WireGuard® connection required, no forwarding of IPv6 data to the internet)
- **NEW** New Online Monitor diagram with expanded information on the load on the internet connection by individual network devices
- **NEW** Extend online time restricted through parental controls by 45 minutes directly in the detailed settings of the network device
- **Improved** When sharing internet access to FRITZ!Box services, an additional IP block list from AVM can be used
- **Improved** For VPN network couplings via WireGuard®, the "fritz.box" domain is resolved in the entire coupled network
- **Improved** For VPN network couplings via WireGuard®, the domain of the remote site can be specified for DNS resolution
- **Improved** More precise explanations of errors during the configuration of WireGuard® connections
- **Improved** Added notification about potential risk of sharing port 80 or 443
- **Improved** Preselection of easiest configuration method for the internet providers Telekom, Vodafone, and EWE for initial configuration on a fiber optic connection
- **Improved** Improved details during the initial configuration behind a fiber optic modem (ONT)
- **Improved** Selection of automatically fair bandwidth distribution in the home network including Ingress shaping as own option in the prioritization settings
- **Improved** The FRITZ!Box user interface can also be opened in the home network by entering "fritzbox.internal" and "fritzbox.home.arpa"
## Wi-Fi:
- **NEW** Visualization of Wi-Fi usage in the home network for the last 7 days added on "Wi-Fi > Wi-Fi Channel"
## Mesh:
- **NEW** Definition of a name and an icon for network devices directly in the Mesh Overview diagram (tooltip)
- **Improved** Details about the LAN connections between FRITZ! devices given in the Mesh Overview diagram (tooltip)
## Telephony:
- **Improved** Recordings on the answering machine now with higher voice quality (HD audio)
- **Improved** The "Enable encrypted telephony" option is offered for the provider "Drillisch GmbH"
- **Improved** Order of telephone numbers in telephone book entries can be changed more easily
- **Improved** The call list shows the country, or for domestic calls, the location, where the call originated
## DECT:
- **NEW** The number of DECT telephone calls possible concurrently was increased from three to five
## DECT/FRITZ!Fon:
- **Improved** Display of Wi-Fi account information can now be switched on or off for each FRITZ!Fon
- **Improved** Easier deletion of multiple emails via the "delete multiple" option
- **Improved** "Weather" start screen now available in all countries
## Home Network:
- **NEW** Names can now also be assigned to devices that use the guest access
- **NEW** Improved overview through individual icons for network devices
- **Improved** Detailed settings of a device on the "Home Network > Network Connections" page redesigned
- **Improved** Troubleshooting and settings for speeds on WAN/LAN connections reworked
- **Improved** Random calculation of the Unique Local Address (ULA, IPv6) in accordance with RFC 4193)
## Smart Home:
- **NEW** On the device page of FRITZ!DECT 350 window sensor in the FRITZ!Box user interface, window open detection can be configured for the selected radiator controls
- **NEW** The templates also allow the user to set the target temperature for radiator controls; the brightness, saturation, and color for lights, and the position for roller shutters in percentage steps
- **NEW** The temperature settings for the radiator control can be restricted to a lowest and highest temperature
- **NEW** Routines can also be triggered by a preset time or a time relative to sunrise/sunset
- **Improved** Reworked registration of Smart Home devices via the FRITZ!Box user interface
## System:
- **NEW ** New diagram of the FRITZ!Box connection status in the overview (homepage)
- **Improved** File name for saved settings now includes name of individual FRITZ!Box
- **Improved** A personal subject line can be be specified for push service
- **Improved** Reworked configuration of push service
- **Improved** Communication to all AVM services for the FRITZ!Box (update, etc.) preferentially via IPv6 with fallback to IPv4
- **Improved** Link to reset the password more prominent in the "Forgot password" email
- **Improved** With "Diagnostics > Function" the services for the Network Time Protocol are checked and relevant information displayed about any errors found
- **Improved** Simplified address changes in push service through the new default recipient, which can be specified independently of the sender
- **Improved** Changes to sender information for email from push service require additional confirmation
- **Improved** Shorter interval for sending push service emails with notifications on user logins with the FRITZ!Box
- **Improved** "Transfer Your Settings to a New FRITZ!Box" wizard improved for a smoother switch from DSL to fiber optic or cable
- **Improved** More reliable detection of FRITZ!Box updates already performed through use of the "Transfer Your Settings to a New FRITZ!Box" function
## USB/Media Server:
- **Improved** Energy-saving function now also works with USB storage devices in Green Mode (USB 2.0)
- **Improved** Data packets downloaded from fritz.nas now include the name of the given FRITZ!Box model and a time stamp in the file name to ease identification
## Powerline:
- **NEW ** Password for all devices in the powerline network can be changed with a single click
# Additional Improvements in FRITZ!OS 8.00
## Internet:
- Changed:- The AES-192 encryption algorithm is no longer supported in Phase 2 SAs of VPN connections
- **Changed** The hash algorithm MD5 and the 3DES encryption algorithm are no longer used on VPN connections over IPSec for reasons of security
- **Changed** The IPv6 option "Assign unique local addresses (ULA) as long as no IPv6 internet connection exists (recommended)" is no longer offered
- **Changed** In PPPoE passthrough operation of the FRITZ!Box, DNS root queries are no longer filtered via UDP
- **Fixed** Under some circumstances the network traffic of a connected telephone system was not routed via a specially configured VoIP interface
- **Fixed** Under certain circumstances, OpenWrt devices operated behind a FRITZ!Box did not receive an IPv6 connection to the internet
- **Fixed** Independent port sharing (UPnP) for the same port with various home network devices did not work under certain circumstances
- **Fixed** In some circumstances active WireGuard® connections were interrupted when adding or deleting WireGuard® connections
- **Fixed** VPN connections via WireGuard® to an endpoint given as multiple (comma separated) domains could not be established
## Wi-Fi:
- **Changed** For improved compatibility with older wireless devices, security settings can be adjusted on the "Wi-Fi > Security" page
- **Changed** Text reference to selection of "WPA2 + WPA3" Wi-Fi encryption removed
- **Fixed** Display of Wi-Fi properties of a registered wireless device was in rare cases incorrect
- **Fixed** When 5-GHz channels were checked for radar (DFS), no wait cursor was displayed under these channels in the user interface
- **Fixed** Repeaters that were logged into the guest network were not marked as "Wi-Fi guests"
## Home Network:
- **Changed** Recommendation to enable the automatic update search at the bottom of the Mesh Overview page
## System:
- **Changed** The link generated by "Forgot Password" push service in the email is valid for 20 minutes
- **Fixed** After results of functional diagnostics were sent, an event message about changed FRITZ!Box settings was displayed
- **Fixed** The "Live TV" button for Magenta TV streaming was missing in the user interface when displayed on smartphones and tablets
## USB/Media Server:
- **Fixed** Files in a folder on the highest level of a file tree could not be moved, copied, or deleted via FTP
- **Fixed** In certain constellations, access to NAS contents via download link was not possible
---Riferimenti
https://download.avm.de/fritzbox/
https://it.avm.de/fritz-lab/
https://en.avm.de/release-notes-fritzos-8/
https://it.avm.de/prodotti/fritzos/fritzos-8/